•
Fit the bracket locking the parallelo-
gram in the holes of the previously re-
moved screws; use the screws sup-
plied with the tool and be careful to
correctly centre the spacer in the bear-
ing.
•
Remove the nut fixing the steering con-
trol arm and keep the original washer
in position.
•
Fit the steering guiding bracket in a
straight riding position, fix one end to
the attachment of the half-arm coupling
flange and the other end to the screw
fixing the steering control arm.
MP3 400 i.e. Suspensions
SUSP - 43
To Next Page
Loading...
