Pilz PSEN sc ME 5.5 08-17 - Page 56

Wiring
Operating Manual PSEN sc ME 5.5 08-17
1005388-EN-01
| 56
Pin/colour Description
8 Red Functional earth
} M12 17-pin male connector for connection to an evaluation device and the supply voltage
– Two OSSD pairs (for the 2. OSSD pair, configurable outputs must be used)
– Four configurable inputs
– Two configurable outputs
– Two configurable inputs/outputs
– Three inputs for supply voltage
– Functional earth
Pin/colour Description
1 Brown 24VDC
10 Brown 24VDC
11 Brown 24 V DC
2 Blue 0VDC
3 Blue 0VDC
12 Blue 0VDC
14 White Configurable input
7 Black Configurable input
6 Orange Configurable input
17 Purple Configurable input
4 Green Configurable output
15 Yellow Configurable output
5 White/black Configurable input/output
9 Red Configurable input/output
13 Grey OSSD 11
8 Pink OSSD 12
16 Yellow/
green
Functional earth
} M12 8-pin socket, hinged
– Connection to the slave unit
} M12 4-pin socket, hinged
Connection of the safety laser scanner to the configuration PC
The configurable inputs and outputs can be used for both input signals and output signals.
The configurable inputs can be used for all input signals.
} Restart and reset
} EDM (when using the 17-pin connection)
} Switching the monitoring of zone sets
} Dynamic and static muting