Planet GS-5220-16S8CR User Manual

User’s Manual of GS-5220-16S8C & GS-5220-16S8CR
To
delete a TACACS+ server entry, check this box. The entry will be deleted during
the next Save.
 Delete
The IP
address or hostname of the TACACS+ server.
 Hostname
The TC
P port to use on the TACACS+ server for authentication.
 Port
Th
is optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
 Timeout
Th
is optional setting overrides the global key. Leaving it blank will use the global key.
 Key
Buttons
: Click to add a new TACACS+ server. An empty row is added to the table, and the
TACACS+ server can be configured as needed. Up to 5 servers are supported.
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.11.8 RADIUS Overview
This Page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration Page. The
RADIUS Authentication/Accounting Server Overview screen in Figure 4-11-9 appears.
Figure 4-11-9: RADIUS Authentication/Accounting Server Overview Page Screenshot
252

Planet GS-5220-16S8CR Specifications

General

Brand	Planet
Model	GS-5220-16S8CR
Category	Switch
Language	English