User’s Manual of GS-5220-16S8C & GS-5220-16S8CR
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.5.2 LACP Configuration
Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports located on a
different device. LACP allows switches connected to each other to discover automatically whether any ports are member of the
same LAG.
This Page allows the user to inspect the current LACP port configurations, and possibly change them as well. The LACP port
settings relate to the currently selected stack unit, as reflected by the Page header. The LACP Configuration screen in Figure
4-5-4 appears.
Figure 4-5-4 : LACP Port Configuration Page Screenshot
99
To Next Page
Loading...
Need help?
General