EasyManua.ls Logo

PocketWizard FlexTT5 - Safety Warnings

PocketWizard FlexTT5
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Batteries
10
The radios will continue to work reliably and consistently until the batteries are exhausted. They are low current
draw devices, and take very little power from the batteries to operate. They will have the same range and
performance when the LED is green, amber or red. At the very end of the batteries life (LED has been red for a
while) they might begin to have issues depending on how well the batteries recover at low voltage, but up until that
very end point they should operate identically shot to shot.
MiniTT1 and FlexTT5 Battery Meter in the PocketWizard Utility
To see your battery level in the PocketWizard Utility, make sure your MiniTT1 or FlexTT5 are turned on (set to C.1
or C.2) before you connect the USB cable. Hover your mouse cursor over the battery icon to get an exact voltage and
battery status.
Storage
For all PocketWizard products,the storage temperature range, without batteries, is above -30° C (-22° F) and below
85° C (185° F).
Always remove batteries during storage.
Battery Warnings
WARNING To avoid battery leakage, follow these guidelines:
Always remove the batteries when the unit is not in use for extended periods of time, or during shipping or long
distance travel.
Never mix old and new batteries. Always use a fresh pair of matched batteries.
Always change batteries promptly at the first indication of low battery operation.
Do not use or leave the unit in extreme temperature or humid environments.

Table of Contents

Other manuals for PocketWizard FlexTT5

Related product manuals