Beta Firmware
114
Beta Firmware
With the latest public release candidate, or beta firmware, you get to try out MiniTT1 and FlexTT5 or other radios'
firmware and features currently being developed and assist us in the final stages before a “Final Release” is available.
Anyone can participate in the beta lab
[1]
but you should be very comfortable using the PocketWizard Utility and be
willing and able to provide detailed feedback
[2]
of your experiences using the beta firmware. If that’s you, then
follow the steps below to begin your own beta test.
Current Firmware
Release notes for all current firmware can be found here: [1]
You must be using PocketWizard Utility version 1.54 or later before installing these firmware version.
MiniTT1 & FlexTT5 for Canon
The current ControlTL Canon firmware is 6.700. This release is available for both FCC and CE radios. There is no
beta release at this time.
MiniTT1 & FlexTT5 for Nikon
The current ControlTL Nikon firmware is 3.700. This release is available for both FCC and CE radios. There is no
beta release at this time.
PowerST4 for Elinchrom
The current PowerST4 firmware is version 5.400. This release is available for both FCC and CE radios. There is no
beta release at this time.
PowerMC2 for Einstein E640 Flash
The current PowerMC2 firmware is version 2.402 for FCC PowerMC2 radios and 2.403 for CE PowerMC2 radios.
There is no beta release at this time.
Plus III
The current Plus III firmware is version 1.200. This release is available for both FCC and CE radios. There is no beta
release at this time.
MultiMAX
The current MultiMAX firmware is version 7.53. This release is available for both FCC and CE radios. There is no
beta release at this time.
Only MultiMAX's with a USB port are capable of downloading firmware. Some older MultiMAX units do not have
a USB port.
We need your FEEDBACK! Feedback on the beta firmware should be sent to PocketWizard via the “Inquires
Form” on our “Contact”
[2]
page or simply email them to betalab@pocketwizard.com
[3]
and put "beta" in the subject
line. Updates to the Beta Lab will be posted to our Facebook page.
[4]
To Next Page
Loading...
