PocketWizard FlexTT5 - HyperSync

MiniTT1 and FlexTT5 Key Features
5
Adjust the manual power settings of your remote Speedlights directly from a AC3
ZoneController, or master flash mounted on your on-camera MiniTT1 or FlexTT5. You can
independently control the power output of up to three remote groups of lights (you can have as
many lights in each group as you want) from full power down to the lowest setting through the
user interface on the back of the master flash or with the dials of the AC3 ZoneController. Now
you can work with total control with your remote lights, without leaving your shooting
position.
HyperSync
Our patent pending HyperSync® technology allows photographers to achieve faster X-sync
speeds with full power flash. That extra speed can be used to freeze action or cut ambient light
- both of which can produce results never possible before. HyperSync works with both
Speedlights and full size studio flash. All you need is a MiniTT1 or FlexTT5 on camera that
has been tuned to your specific camera and flash via the PocketWizard Utility. While
performance varies by the camera and flash equipment being used, HyperSync will get the
maximum possible out of any set-up.
High Speed Sync (Auto FP)
When HyperSync can’t keep up, the native Canon and Nikon system's High Speed Sync takes over for Speedlite
flash photography all the way to 1/8000. ControlTL gains faster recycling times and more flashes per set of batteries
when shooting in Auto FP / HSS Flash mode. Use this feature to shoot wide open in bright sun for amazing results.
Rear Curtain Sync
We've optimized Rear Curtain Sync performance with Canon cameras, and also extend via
radio the Rear Curtain Sync capabilities of Nikon cameras.
PowerTracking
When working with certain manual flashes, you can change any of your settings on your
camera and the system adjusts for those settings. Change your camera's exposure compensation
to adjust the flash output, or make adjustments in aperture or ISO and the system balances your flash for proper
exposure.
PocketWizard Utility
Programmable and Upgradeable: Use the PocketWizard Utility software with the on-board USB port to program the
MiniTT1 and FlexTT5 to any PocketWizard channel and zone as well as many other custom settings. ControlTL
radios can be upgraded whenever updates and feature enhancements are available.