PocketWizard FlexTT5 - Hardware Options

Long Range Performance
110
Orient your antenna so that the tip of the antenna is a vertical straight line with the
opposite corner of the FlexTT5 Transceiver.
Yes, it's a bit contorted but it works.
Optimal Antenna Position
Hardware Options
Use a Canon OC-E3 cord.
Ideally, use the cord with a ferrite choke added to the end of the cord
nearest the flash, to separate the flash from the FlexTT5 Transceiver. For
best performance, the FlexTT5 should be 18” or more away from the flash
and ideally positioned above it (the higher the radio, the better the
reception). For best results, the FlexTT5 should be positioned at least five
feet off the ground. This should increase range from 200 to 500%.
{{{annotations}}}
Better
<!-- --/>