Channels
24
ControlTL Channels
ControlTL Channels were introduced with the Canon MiniTT1 and FlexTT5. They are used in all ControlTL radios
like the Canon & Nikon MiniTT1 and FlexTT5, as well as the PowerST4, PowerMC2, or other ControlTL radios.
These Channels allow for remote power control of compatible studio flashes, and work with ControlTL signals sent
from a transmitting ControlTL radio.
ControlTL Channels do not have a unique channel code like Standard Channels, and are separated only by
frequency.
ControlTL Channels 1 through 20
ControlTL
Channel
Frequency All PocketWizard
ControlTL radios like:
MiniTT1, FlexTT5
PowerST4, PowerMC2
1 340
2 345
3 341
4 346
5 346.5
6 347
7 347.5
8 348
9 348.5
10 349
11 349.5
12 350
13 350.5
14 351
15 340.5
16 341.5
17 342
18 342.5
19 343
20 345.5
Channel and Frequency Overlap
Some ControlTL Channels use the same frequencies as some Standard Channels. A ControlTL Channel broadcasting
on a Standard Channel's frequency will not trigger it, but if the radio transmissions are occurring at the same time,
then there is a possibility one or both may not trigger. A single ControlTL transmitter set to transmit on both
Standard Channel 17 and ControlTL Channel 5 will handle this properly. Two radios on the same frequency, like a
MultiMAX transmitting on Standard Channel 18 and a ControlTL radio receiving on ControlTL Channel 6, may
interfere with each other - when the MultiMAX is transmitting, the ControlTL receiver may not hear its trigger
because it is on the same frequency.
To Next Page
Loading...
