PocketWizard FlexTT5 - Powerst4 Default Settings; Powermc2 Default Settings; Multimax Default Settings

Factory Reset
78
PowerST4 Default Settings
Channel Tab
Use ControlTL for Rx Channel = enabled
ControlTL Channel 1, Standard Channel 1
Exposure Tab
Exposure Compensation = 0.0
Sleep Tab
Modeling Light Sleep Mode = enabled
Modeling Light Sleep Delay = 600 secs/10 minutes
Misc Tab
Ranger RX Head Selection = S-Head
Digital 1200/2400RX Head Selection = Digital S
PowerMC2 Default Settings
Exposure Tab
Flash Exposure Compensation = 0
Sleep Tab
Modeling Light Sleep Mode = enabled
Modeling Light Sleep Delay = 600 secs
Hibernate Mode = enabled
Hibernate Delay = 60 min
MultiMAX Default Settings
Coming Soon