PocketWizard FlexTT5 - Key features of the PocketWizard Utility

73
Utility
PocketWizard Utility
Next recommended reading: Factory Reset
Utility Tab Quick Links
Update
Channel
Flash
HyperSync/HSS
PowerTracking
Modeling
Sleep
Misc
Exposure
Advanced features in the MiniTT1 and FlexTT5 are available when using the PocketWizard Utility and connecting
your radio to your PC or Mac via a USB cable. The PocketWizard Utility allows you to update your USB enabled
PocketWizard with the latest Firmware and adjust the features of the MiniTT1 and FlexTT5. The latest version of the
utility can be downloaded from pocketwizard.com
[1]
.
System Requirements
• Internet connection (for downloading Firmware and Application updates).
• Working USB connection (to connect USB enabled PocketWizard).
• USB cable with standard USB connector(to connect to PC) to mini USB connector (to connect to PocketWizard).
Key features of the PocketWizard Utility
• Updating the firmware in USB enabled PocketWizards. Currently this includes the Plus III, MultiMAX,
PowerMC2, PowerST4, and the Canon and Nikon versions of the MiniTT1 and FlexTT5.
• Modifying the settings for the C1 and C2 configurations in a MiniTT1 or FlexTT5 and select functions of the
PowerST4 and PowerMC2. Configurations are similar to custom function settings in your camera, allowing you
to have different setups, depending on the results desired or equipment used. Please see the Factory Reset page for
the default configuration settings.