AC3 ZoneController
72
Compatiblity Canon E-TTL II OR Nikon CLS/i-TTL
Elinchrom RX, AlienBees, White Lightning, Einstein™ E640 Flash
Mounting Hot Shoe
Selector Switch Off, Manual, Auto (PowerTracking, E-TTL II, CLS/i-TTL)
Adjustment Range Auto = +/- 3 stops, 1/3 stop increments
Status Indicator LED: Green status indicator
Operating
Temperature
Above -15° C (5° F) and below 50° C (120° F)
Storage Temperature Above -30° C (22° F) and below 85° C (185° F)
Construction high impact plastic - RoHS Compliant
Power Receives power from attached radio
Dimensions 2" (5cm) wide x 1.7" (4.2 cm) long x .9" (2.1cm) tall
Weight .82 ounces (23.25 grams)
Requirements Dedicated AC3 Version for Nikon and Canon systems. Must be used in conjunction with a MiniTT1 or FlexTT5 on
camera.
Power Control for Non-Compatible Cameras
You can use your MiniTT1 or FlexTT5 with an AC3 ZoneController on nearly *any* camera with a basic hot shoe
to get Manual Power Control for Mamiya, Leica, Hassleblad, mirrorless cameras, etc. Trigger any ControlTL
receiver in sync up to 1/125 on some models of camera.
You can read more about this exciting feature on our Power Control for Non-Compatible Cameras page.
To Next Page
Loading...
