Modeling Tab
91
Modeling Light Autotrack
Enable this control for the modeling light level to track with the camera exposure or AC3 Power Dial settings.
Modeling Light Active XX%
Sets the active output level of the modeling light if Autotrack is not used.
Modeling Light Sleep
Check this box to have the modeling light automatically go to a set output level after a set time. If this box is
unchecked, the modeling light will never sleep.
Modeling Light Sleep XX%
Sets the output level of the modeling light when it sleeps.
Modeling Light Delay After Camera Sleeps
Sets the number of seconds after the camera sleeps (meters go inactive) when the modeling light will go to its sleep
value.
Sleep Tab
Utility Tab Quick Links
Update
Channel
Flash
HyperSync/HSS
PowerTracking
Modeling
Sleep
Misc
Exposure
To Next Page
Loading...
