PocketWizard FlexTT5 - Minitt1 and Flextt5; Operation

MiniTT1 and FlexTT5
1
MiniTT1 and FlexTT5
Congratulations on your purchase of
the PocketWizard MiniTT1® /
FlexTT5® Wireless Photo Control
System for Canon or Nikon DSLR
cameras and flashes. You can use the
MiniTT1 Transmitter and FlexTT5
Transceiver to control single or
multiple off-camera electronic or
intelligent TTL flashes. The
PocketWizard ControlTL® System
takes the complex TTL data being sent
through the camera’s hot shoe and
digitally interprets and transmits it as a
reliable radio signal. You can now
place TTL or manual flashes anywhere
to illuminate the scene: Around
corners, out-of-sight and in bright sunlight. The MiniTT1 and FlexTT5 are compatible with any PocketWizard radio
for triggering manual flash or remote cameras.
The Canon-specific MiniTT1 and FlexTT5 radios work within the Canon E-TTL II system.
The Nikon-specific MiniTT1 and FlexTT5 radios work within the Nikon i-TTL / CLS system.
All references to TTL are exclusively for the electronic or intelligent TTL systems specific to Canon (E-TTL II) and
Nikon (i-TTL / CLS), and not film TTL.
The terms Speedlite or Speedlight are used interchangeably throughout this wiki.
This wiki contains the latest information about the operation of your radios. If you would like to download a PDF of
this information, click here and follow the instructions.
Operation
Quick Navigation
Getting Started
MiniTT1 and FlexTT5 Key Features
Safety Warnings
Nikon Compatibility
Canon Compatibility
Batteries
PocketWizard Utility
Basic Wireless TTL
Advanced Wireless TTL
Manual Flash
PowerTracking