Status LED
13
Reset
If TEST is held on power up then RESET A and RESET B can be performed. Two green blinks in a row indicate
that RESET A was completed. Four green blinks in a row appear when RESET B has been completed. RESET A
resets channels learned in the field back to those programmed via the PocketWizard Utility. RESET B sets the radio
to factory default settings.
<videoflash>b1ZUvRgk-0Y&loop=1&rel=0&autoplay=0&autohide=1|225|155</videoflash>
To Next Page
Loading...
