Learn Mode
31
• 1 green blink = Low Standard channel learned (1 through 16, including Plus 1 through 4)
• 2 green blinks = High Standard channel learned (MultiMAX 17 through 32)
• 3 green blinks = ControlTL channel learned for MiniTT1 or FlexTT5
• If you see no green blinks during the LEARN cycle then the radio did not learn a new channel and will use the
previous one. Hold the radios farther apart and try teaching again.
For remote E-TTL II to function, the ControlTL channel must be learned. If you see only 1 or 2 green blinks after
teaching then a Standard channel was learned and E-TTL II will not function. If you desire E-TTL II functionality,
teach the FlexTT5 again from the MiniTT1 or FlexTT5 to be used as the primary transmitter and look for 3 green
blinks.
To Next Page
Loading...
