MiniTT1 and FlexTT5
3
PocketWizard Utility
Connect your radios to your computer via USB and control many aspects of them via the PocketWizard Utility.
Basic Wireless TTL
Simple TTL operation instructions. Use all of your Speedlites as one zone of light with the camera making the
exposure decision.
Advanced Wireless TTL
Advanced i-TTL operation instructions. Control individual zones of light. Control your remote Speedlights manually
from the camera position.
Manual Flash
Trigger any remote flash simply.
PowerTracking
Trigger a compatible remote studio flash and control its power level directly from the camera position.
HyperSync
Learn more about increasing your X-Sync speed using HyperSync.
High Speed Sync / Auto FP
Use your Speedlites with your camera's fastest shutter speeds. See Understanding HyperSync and High Speed Sync.
Channels
Channels allow you to work collaboratively with other photographers, or to work with your radios exclusively.
Learn Mode
Learn Mode is not required for normal operation of your radios, but if you are working away from the PocketWizard
Utility and in conflict with another photographer on your channel, Learn Mode allows you to change channels in the
field.
Remote Camera Triggering
In addition to triggering remote flash, your PocketWizard radios can trigger a remote camera's motor drive port.
Relay Mode is covered in this section.
To Next Page
Loading...
