5.28
Engine and Cooling Systems
7. Reinstall the crankshaft back into the lower crankcase using
two new crankcase seals.
8. Apply a thin bead of Three Bond 1215 to the lower
crankcase mating surface. Install the upper crankcase.
9. Loosely install the crankcase fasteners, then torque to the
specifications at the beginning of the chapter. Use the
correct torque sequence when tightening the screws.
10. Liberally coat the crankshaft bearings and components with
Polaris two-stroke engine oil.
To Next Page
Loading...
Need help?
General
