Polaris IQ 2007 - Hood; Plastic Repair; Hood Assembly

10.3
Chassis
10
Hood Assembly
Hood / Plastic Repair
Hoods are made of Thermoplastic Olefin (TPO) and cannot be
repaired. If a hood is broken it must be replaced. For small
cracks, drill a small hole on both ends of the crack to limit
spreading.
BRAKE DUCT
(NOT ALL MODELS)
INSTRUMENT POD
INTAKE / ACCESS COVER
FRONT GRILLE / HINGE
MFD
PRE FILTER
HEADLIGHT SEALS
(ATTACH TO INSIDE OF
HOOD AROUND HEADLIGHT
OPENING AND WHERE
POD MEETS WINDSHIELD
FLARE.)
HOOD - CONSOLE SEAL
NOTE: TORQUE FASTENERS HAND TIGHT
Crack
Drill hole