Polaris IQ 2007 User Manual

3.18
Maintenance
STEERING / SUSPENSION
MAINTENANCE
Handlebars
Periodically inspect the torque of the handlebar clamp fasteners.
1. To adjust the handlebar angle, remove the handlebar cover
to expose the clamp.
2. Loosen the four clamp fasteners. Slightly pry the upper
clamp up with a flat blade screwdriver.
3. Adjust handlebars to desired position. Verify the wiring
harness, brake hose, and throttle cable do not kink.
4. Secure the front clamp fasteners first to specification.
Finish by securing the two rear clamp fasteners to the same
torque setting.
5. If equipped, reinstall the handlebar cover.
Rider Select Steering U-Joint
The rider select steering U-joint should be lubricated with
Polaris fogging oil (PN 2870791).
= T
Handlebar Clamp Fastener Torque
16 Ft.Lbs. (21 Nm)
STEERING POST
CLAMPS
APPLY FOGGING OIL

Polaris IQ 2007 Specifications

General

Brand	Polaris
Model	IQ 2007
Category	Offroad Vehicle
Language	English