Polaroid Spectra/Image One Board User Manual

25
Test Procedure
1. Erect the camera and open the film door.
2. Install the film pack simulator with the adapter into the camera. The camera should
not cycle.
3. Remove the film pack simulator from the camera.
4. Using the tip of a solder aide, close the camera door latch (Figure 3-2).
Figure 3-2. Closing door latch
Push in with soldering
aide (greenstick) to
close door latch.

Polaroid Spectra/Image One Board Specifications

General

Brand	Polaroid
Model	Spectra/Image One Board
Category	Digital Camera
Language	English