Configuring KIRK Wireless Server 6000
10–15
Built-In Media Resource Configuration
On the Configuration/Media Resource page you configure the built-in Media
Resource.
Refer to “Built-In Media Resource Configuration” on page 10-9 for more
information.
SIP Configuration
On the Configuration/SIP page you define general SIP settings, information
about authentication, DTMF signalling, message waiting indication and
media.
Refer to “SIP Configuration” on page 10-10 for more information.
Security Configuration
It is possible to change the password for the unit from the
Configuration/Security page.
Refer to “Security Configuration” on page 10-12 for more information.
Checking Indicators
• Verify that the KWS6000/media resource LED indicator is continuously
on, indicating that the KWS6000/media resource is functional.
Making a Back-Up of the Configuration File
For more information, refer to “Making a Back-Up of the Configuration File”
on page 15-10.
Note
The LED will not be on before the base stations are configured.
To Next Page
Loading...
