6–1
6
Installing KIRK Repeater
This section provides information about the repeater and how to unpack and
install it. Installing repeaters requires a software installation as well as a
hardware installation.
Before you install the equipment, ensure that a site planner defines the location
of the repeaters.
This section includes information about:
• “KIRK Repeater Description” on page 6-1
• “Installing the KIRK Repeater” on page 6-4
• “Recording the Installation Information” on page 6-7
• “Checking Indicators” on page 6-7
• “Powering the KIRK Repeater” on page 6-7
• “Programming a KIRK Repeater with the KIRK Programming Kit” on
page 6-7
KIRK Repeater Description
This section contains information about:
• “KIRK Repeater provides RF Channels to KIRK Handsets” on page 6-1
• “KIRK Repeater Types and Part Numbers” on page 6-2
• “KIRK Repeater - Appearance and Components” on page 6-3
• “KIRK Repeater LED Indicators” on page 6-4
KIRK Repeater provides RF Channels to KIRK Handsets
The KIRK Repeater is a building block to be used to extend the coverage area
in a KIRK solution. The repeater does not increase the number of traffic
channels, however it provides a larger physical spreading of the traffic
channels and thereby increases the coverage area established with the KIRK
To Next Page
Loading...
