Polycom KIRK 6000 - Adjusting the KIRK Handset; Content of the KIRK Programming Kit Handset

KIRK Handset Management
14–13
Adjusting the KIRK Handset
This section provides information about:
• “Content of the KIRK Programming Kit Handset” on page 14-13
• “Set up of the Hardware for KIRK Handset Adjustment” on page 14-14
• “Adjusting the KIRK Handset with the ServiceTool” on page 14-14
Content of the KIRK Programming Kit Handset
The Programming Kit Handset (Part no. 02319509) for the 3040 Handset
consists of:
• serial cable
• programming stand
• 220V power supply
The Programming Kit Handset (Part no. 02319542) for the 40XX Handset (see
illustration below) consists of:
• serial cable
• splitter
Figure 14-18Programming Kit Handset
Note
This section only contains information about adjusting the
3040/4020/4040/4080 Handsets.
Splitter
Serial cable
Note
For handset adjustment of the 40XX Handset you use the charger
accompanying the handset.