KIRK Wireless Server 6000 Installation and Configuration Guide
4–6
KWS6000/KIRK Media Resource - Reset Button
It is possible to restart or reset the KWS6000/media resource by pressing the
Reset button on the faceplate of the KWS6000/media resource. For description
of the faceplate, refer to “Faceplate” on page 4-5.
Resetting the KWS6000/KIRK Media Resource Hardware
This section contains a description of the different actions that take place when
pressing the Reset button.
Table 4-5 Reset Button Description
Press button Action
Short press (2 to 5 sec.) System restarts when button is released.
Long press (5 to 9 sec.)
until front LED flashes
red, then release button
Resets the system to factory default settings (original
IP settings and empty user data base) and restarts the
system.
Firmware version is not affected.
To Next Page
Loading...
