KIRK Wireless Server 6000 Installation and Configuration Guide
10–2
Local Power Supply
Powering the KWS6000 with a local power supply can be done using the
power input on the unit.
Connecting a Computer to the KWS6000
The KWS6000 communicates with the computer through a cross-over patch
cable.
Figure 10-1 Cross-over patch cable (RJ45)
1 Connect the cross-over patch cable to the computer.
Note
The power supply for the KWS6000 is to be ordered separately (Part no.
EU, UK and US version: 84642468).
Note
The LAN port of the KWS6000 is a RJ45 connector.
To Next Page
Loading...
