4–1
4
Installing KIRK Wireless Server 6000
and KIRK Media Resource
This section provides a description of the KWS6000 and media resource. The
section also provides information about resetting the KWS6000 hardware
using the Reset button on the KWS6000/media resource faceplate.
Before you install the equipment, ensure that a site planner defines the
locations of the KWS6000 and media resources.
This section contains the following information:
• “Description of KWS6000/KIRK Media Resource” on page 4-2
• “Installing the KWS6000/KIRK Media Resource” on page 4-7
Note
The installation of a media resource is optional. Installation of a media
resource will augment the number of simultaneous voice calls supported by
a stand-alone server.
To Next Page
Loading...
