Configuring KIRK Wireless Server 6000
10–9
Wireless Server Configuration
On the Configuration/Wireless Server page you configure the KWS6000 to
allow subscription. If the system does not allow subscription, it is not possible
to subscribe a handset.
1 Click Configuration, and then click Wireless Server.
2 Select the Subscription Allowed check box (optional).
Note: If not selected, you cannot subscribe a handset.
3 Click Save.
Built-In Media Resource Configuration
On the Configuration/Media Resource page you configure the built-in Media
Resource.
1 Click Configuration, and then click Media Resource.
Figure 10-8 Adm. Page WS: Configuration/Media Resource page
2 In the Host field, type localhost if you want to activate the built-in media
resource.
3 Click Save.
To Next Page
Loading...
