Polycom KIRK 6000 - Sync. Ways Configuration

KIRK Wireless Server 6000 Installation and Configuration Guide
12–8
4 In the New password field, type a password.
5 In the New password again, type the password again.
6 Click Allow remote logging if it should be possible to log on to the
system remotely (Useful in case of troubleshooting).
7 Click Save.
Sync. Ways Configuration
It is necessary to define the synchronization ways of the base station.
1 To define the sync. ways of the base station, open the Administration
Page for the KWS6000.
2 Click Administration, and then click Base Station.
Figure 12-8 Adm. Page WS:Administration/Base station page
3 Double-click on the relevant base station in the list.