Configuring KIRK Base Station
12–7
General Configuration
On the General Configuration page you define DNS settings for the base
station.
1 Click Configuration, and then click General.
Figure 12-6 Adm. Page Base Station: Configuration/General page
2 Click DHCP assigned.
3 In the MTU field (Maximum Translation Unit), type the size of the largest
packet, that your network protocol can transmit (optional).
4 In the Domain field, type the domain name of the system (optional).
5 In the Server field (under DNS - Domain Name System), type the IP
address of the domain name (optional).
Security Configuration
It is possible to change the password for the unit.
1 Click Configuration, and then click Security (optional).
Figure 12-7 Adm. Page Base Station: Configuration/Security page
2 In the Current password field, type the current password.
3 In the New username field, type a new username.
To Next Page
Loading...
