Configuring KIRK Base Station
12–11
Base Station Configuration
How to configure the base station:
1 Click Configuration, and then click Base station.
Figure 12-11 Adm. Page Base Station: Configuration/Base station page
2 In the Host field, type the host name of the KWS6000.
3 Click Save.
4 Click Reboot to enable the configuration changes.
Security Configuration
It is possible to change the password for the unit.
Refer to “Security Configuration” on page 12-7 for more information.
Sync. Ways Configuration
It is necessary to configure the sync. ways of the base station.
Refer to “Sync. Ways Configuration” on page 12-8 for more information.
Checking Indicators
• Verify that the base station LED indicator is continuously on, indicating
that the base station is functional.
Making a Back-Up of the Configuration File
For more information, refer to “Making a Back-Up of the Configuration File”
on page 15-10.
To Next Page
Loading...
