Installing KIRK Wireless Server 6000 and KIRK Media Resource
4–7
Installing the KWS6000/KIRK Media Resource
The KWS6000/media resource is suitable for mounting indoors on a wall.
1 Mount the KWS6000/media resource on the wall, using the anchors and
screws provided.
Note: When you place the KWS6000/media resource on the screws,
ensure that the screws do not touch the printed circuit board.
Figure 4-3 KWS6000/Media Resource Wall Mounting
2 Connect the wire into the RJ45 plug on the KWS6000/media resource.
To Next Page
Loading...
