Configuring KIRK Media Resources
11–5
4 Click Use the following IP address, and then type 192.168.0.2 in the IP
address field.
5 In the Subnet mask field, type 255.255.255.0.
6 Click OK.
You can now reach the media resource using a standard web browser.
How to Access the Administration Page
The web based Administration Page is accessed through a standard web
browser.
1 Open a web browser.
The base station is pre-configured with DHCP. If no DHSP server is
available, the base station will fall back to the static address
http://192.168.0.1 after a few minutes.
The KWS6000 Administration Page appears.
Figure 11-4 Main page of the Administration Page for wireless server
Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user
name and a password.
Note
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommeded to change the password,
refer to “Changing System User Name and Password”
on page 15-17.
To Next Page
Loading...
