KIRK Wireless Server 6000 Installation and Configuration Guide
10–12
Security Configuration
It is possible to change the password for the unit from the
Configuration/Security page.
1 Click Configuration, and then click Security (optional).
Figure 10-10Adm. Page: Configuration/Security page
2 In the Current password field, type the current password.
3 In the New username field, type a new username.
4 In the New password field, type a password.
5 In the New password again, type the password again.
6 Click Allow remote logging if it should be possible to perform remote
logging (Useful in case of problem solving).
7 Click Save.
To Next Page
Loading...
