Preparing KIRK Handset for Use
8–9
Figure 8-8 Single Charger for 5020 Handset
Figure 8-9 Single Charger for 5040 Handset
Charging Battery
KIRK 3040/KIRK 4020/KIRK 4040 and KIRK 4080 Handsets
When charging the battery for the first time, it is necessary to leave the handset
in the charger for 14 - 16 hours before the battery is fully charged and the
handset ready for use.
Warning
Do not charge 4080 Handset in a potentially explosive atmostphere. Use
only the dedicated charger (orange) for charging of 4080 Handset.
Note
During normal operation, it takes approximately 3 1/2 hours to charge the
handset from fully discharged to its full capacity.
To Next Page
Loading...
