KIRK Wireless Server 6000 Installation and Configuration Guide
14–14
Set up of the Hardware for KIRK Handset Adjustment
1 Connect the serial cable to the programming stand/charger and Com
port of your computer.
2 Place the handset in the charger.
The handset is now ready for programming via the ServiceTool.
Adjusting the KIRK Handset with the ServiceTool
The ServiceTool is the tool you access from your desktop and use for repeater
programming, handset adjustment and software download to the handset and
repeater.
For more information about adjusting the handset with the ServiceTool, refer
to the Help File in the ServiceTool. The ServiceTool is to be downloaded from
www.polycom.com.
Note
For handset adjustment you also need the programming software
(ServiceTool). The ServiceTool is not part of the Programming Kit
Handset but can be downloaded from www.polycom.com.
To Next Page
Loading...
Need help?
General
