Preparing KIRK Handset for Use
8–5
Installing Battery on KIRK 3040 Handsets
This section describes how to install the battery on a 3040 Handset.
1 To install the battery press down the back cover and push it 5 mm
towards the headset plug.
Figure 8-1 Remove Back Cover from Handset
2 Lift off back cover.
3 Place the battery plug in the slot in the battery box.
4 Insert battery with the label readable.
5 Replace the back cover.
Installing Battery on KIRK 4020/KIRK 4040/KIRK 4080 Handsets
..
Note
The battery is connected to the handset when it is shipped from the factory.
Warning
The battery in a 4080 Handset must not be removed in a potentially
explosive atmosphere. Only use battery type 84743416 in the 4080
Handset.
To Next Page
Loading...
