KIRK Wireless Server 6000 Installation and Configuration Guide
11–2
Local Power Supply
Powering the media resource with a local power supply can be done using the
power input on the unit.
Connecting a Computer to the KIRK Media Resource
The media resource communicates with the computer through a cross-over
patch cable.
Figure 11-1 Cross-Over Patch Cable (RJ45)
1 Connect the cross-over patch cable to the computer.
Note
The power supply for the media resource is to be ordered separately (Part
no. EU, UK and US version: 84642468).
Note
The LAN port of the media resource is a RJ45 connector.
To Next Page
Loading...
