EasyManuals Logo

Polycom KIRK 6000 User Manual

Polycom KIRK 6000
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Configuring KIRK Base Station
12–5
4 Click Use the following IP address, and then type 192.168.0.2 in the IP
address field.
5 In the Subnet mask field, type 255.255.255.0.
6 Click OK.
You can now reach the base station using a standard web browser.
How to Access the Administration Page
The web based Administration Page is accessed through a standard web
browser.
1 Open a web browser.
2 In the browsers Address bar, type http://192.168.0.1, and then press
ENTER.
Note: The base station is pre-configured with the IP address: 192.168.0.1
through the ETH port.
The Administration Page for the base station appears.
Figure 12-4 Main page of the Administration Page for base station
Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user
name and a password.
Note
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommended to change the password,
refer to “Changing System User Name and Password”
on page 15-23.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom KIRK 6000 and is the answer not in the manual?

Polycom KIRK 6000 Specifications

General IconGeneral
BrandPolycom
ModelKIRK 6000
CategoryServer
LanguageEnglish

Related product manuals