KIRK Wireless Server 6000 Installation and Configuration Guide
15–2
KIRK Wireless Server 6000
This section includes information about:
• “Changing System User Name and Password” on page 15-2
• “Reading System Information” on page 15-3
• “Reading Statistics” on page 15-6
• “Making a Back-Up of the Configuration File” on page 15-10
• “Restoring Configuration File” on page 15-12
• “Updating the KIRK Wireless Server 6000” on page 15-13
• “Restarting the KIRK Wireless Server 6000” on page 15-14
Changing System User Name and Password
From the Administration Page it is possible to change the user name and
password for the system.
1 Click Configuration, and then click Security.
Figure 15-1 Adm. Page WS: Configuration/Security page
2 In the Current password field, type the current password.
3 In the New user name field, type a user name.
4 In the New password field, type a new password
5 In the New password again field, type the new password again to
confirm it.
6 Click Save to change the password.
Note
Ensure that you have opened the Administration Page of the KWS6000.
To Next Page
Loading...
Need help?
General
