KIRK Wireless Server 6000 Installation and Configuration Guide
10–6
Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user
name and a password.
Figure 10-5 Adm. Page: Enter Network Password dialog box
1 In the User Name field, type admin.
2 In the Password field, type ip6000.
3 Click OK.
Note
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommeded to change the password,
refer to “Changing System User Name and Password”
on page 15-2.
To Next Page
Loading...
