Polycom RealPresence Group 310 Administrator's Guide

3. Select Save.
Configure System Display Name During Call
You can configure to display the system name in place of SIP address in the RealPresence Group Series
system web interface.
Procedure
1. In the system web interface, go to Admin Settings > System Setting > Call Settings.
2. Select the Display System Name Instead of SIP Address check box.
Configuring Call Settings
Polycom, Inc. 130

Polycom RealPresence Group 310 Specifications

General

Network Protocols	H.323, SIP
Network Interfaces	1 x 10/100/1000 Ethernet
Video Resolution	1080p, 720p
Audio Standards	G.711, G.722, G.722.1, G.728, G.729A
Video Standards	H.263, H.263+, H.264, H.264 High Profile
Network	10/100/1000 Ethernet
Video Input	1 x HDMI
Video Output	HDMI
Audio Input	1 x 3.5mm stereo line-in
Audio Output	1 x 3.5mm stereo line-out
Other Interfaces	2 x USB 2.0
People Video Resolution	1080p
Content Sharing	People+Content IP
Security	AES
Camera	Polycom EagleEye Acoustic or EagleEye IV