Polycom RealPresence Group 310 Administrator's Guide

If you are using the EagleEye Digital Extender or the Digital Breakout Adapter with the Polycom EagleEye
Acoustic camera, the audio from the camera is not passed to the system. You must use a tabletop
microphone array or a ceiling microphone array.
Indicator Lights
The following figure shows the location of the LED on the front of the EagleEye Acoustic camera.
Ref. Number Description
1 IR Sensor
2 System Status
The system status light provides the following information.
Indicator Light System Status
Steady blue light System is on and awake.
Blinking blue light Camera firmware is being updated.
Steady amber light System is asleep.
Steady green light System is in a call.
Configuring a Camera or Camera Control System
Polycom, Inc. 191

Polycom RealPresence Group 310 Specifications

General

Network Protocols	H.323, SIP
Network Interfaces	1 x 10/100/1000 Ethernet
Video Resolution	1080p, 720p
Audio Standards	G.711, G.722, G.722.1, G.728, G.729A
Video Standards	H.263, H.263+, H.264, H.264 High Profile
Network	10/100/1000 Ethernet
Video Input	1 x HDMI
Video Output	HDMI
Audio Input	1 x 3.5mm stereo line-in
Audio Output	1 x 3.5mm stereo line-out
Other Interfaces	2 x USB 2.0
People Video Resolution	1080p
Content Sharing	People+Content IP
Security	AES
Camera	Polycom EagleEye Acoustic or EagleEye IV