Transfer System Log Files
You can transfer logs to a USB flash drive to free up space on your system.
Procedure
1. In the local interface, go to Settings > Administration > Security > Log Management.
2. Click Transfer System Log to USB Device.
Note: Wait until the system displays a message that the log transfer has completed successfully
before you remove the USB flash drive.
The system saves a file in the USB flash drive named according to the settings in the system web
interface.
Related Links
Retrieving Log Files on page 261
Related Links
Download System Log Files on page 261
SNMP Reporting
systems support SNMP versions 1, 2c, and 3.
SNMP can provide the following event information about your system:
• Alert conditions located on the system alert screen
• Details of jitter, latency, and packet loss
• Low battery power in the remote control
• System power on
• Successful or unsuccessful administrator login
• Call fail for a reason other than a busy line
• User help request
• Video or audio call connection or disconnection
SNMPv3 does the following:
• Provides secure connections between the SNMP manager and agent
• Supports both IPv4 and IPv6 networks
• Logs all configuration change events
• Supports a user-based security model
• Supports trap destination addresses
Configure SNMP Management
You can monitor your system remotely with SNMP.
Procedure
1. In the system web interface, go to Admin Settings > Servers > SNMP.
2. Configure the following settings and select Save.
System Maintenance
Polycom, Inc. 262
To Next Page
Loading...
Need help?
General
