Enable Kiosk Mode
You must enable Kiosk Mode in the RealPresence Group Series system web interface before users can
use it in the system local interface. You also must either enable and configure Speed Dial or Calendaring
before Kiosk Mode is available.
Procedure
1. In the system web interface, do one of the following:
• Enable and configure Speed Dial at Admin Settings > General Settings > Home Screen
Settings.
• Enable and configure the Calendaring Service at Admin Settings > Servers > Calendaring
Service.
2. Go to Admin Settings > General Settings > Home Screen Settings > Kiosk Mode, mark the
Enable Kiosk Mode check box and click Save.
Related Links
Setting Up Speed Dial on page 136
Setting Up and Configuring Directory Servers
The global directory provides a list of RealPresence Group Series systems that are registered with the
Global Directory Server and are available for calls. The other systems appear in the directory, allowing
users to place calls to participants by selecting their names.
Related Links
Set Up Multitiered Directory Navigation on page 37
Configuring a Directory Server
You can configure the RealPresence Group Series system to use one of the following directory servers in
standard operating mode.
Supported Directory
Servers
Authentication
Protocols
Global Directory Groups
Entry Calling
Information
Microsoft
Skype for Business
Server 2015
NTLM v2 only Contact groups but not
distribution lists
Might include:
• SIP address (SIP URI)
LDAP
with H.350 or Active
Directory
Any of the following:
• NTLM v2 only
• Basic
• Anonymous
Not Supported Might include:
• H.323 IP address (raw
IPv4 address, DNS
name, H.323 dialed
digits, H.323 ID, or H.
323 extension)
• SIP address (SIP URI)
• ISDN number
• Phone number*
Registering with a Directory
Polycom, Inc. 138
To Next Page
Loading...
Need help?
General
