Polycom RealPresence Group 310 Administrator's Guide

Changing a Password
Polycom recommends that you change the default Admin ID and the default password for your
RealPresence Group Series system. Keep the following naming conventions in mind:
• The string “root” cannot be used as an ID.
• ID and password strings are not case sensitive.
Note: Make sure you can recall the admin password if you set one. If you forget the password,
you must use the restore button to run the setup wizard again to access the Admin
Settings in the system web interface and reset the password.
Search the Web Interface
In a text box just under the IP Address bar on the RealPresence Group Series system web interface
Place a Call screen, you can enter a search term to receive a list of system web screens. For instance, if
you type Call, the system generates a list of screens that match your search term, such as Call
Settings, Recent Calls, and Time in Call.
Procedure
1. In the Search box, type a text string.
2. Select any of the search results to go directly to that screen in the system web interface.
Getting Started
Polycom, Inc. 20

Polycom RealPresence Group 310 Specifications

General

Network Protocols	H.323, SIP
Network Interfaces	1 x 10/100/1000 Ethernet
Video Resolution	1080p, 720p
Audio Standards	G.711, G.722, G.722.1, G.728, G.729A
Video Standards	H.263, H.263+, H.264, H.264 High Profile
Network	10/100/1000 Ethernet
Video Input	1 x HDMI
Video Output	HDMI
Audio Input	1 x 3.5mm stereo line-in
Audio Output	1 x 3.5mm stereo line-out
Other Interfaces	2 x USB 2.0
People Video Resolution	1080p
Content Sharing	People+Content IP
Security	AES
Camera	Polycom EagleEye Acoustic or EagleEye IV