Set the Language
You can select from 16 different languages to display in the RealPresence Group Series local and system
web interfaces.
Procedure
» In the system web interface, go to Admin Settings > General Settings > Language and select
the language to use in the interface.
Set the Date and Time
On either the system web interface, you can set the date and time settings for your RealPresence Group
Series system.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > Date and Time >
System Time.
2. Configure these settings:
Setting Description
Date Format Specifies how the date is displayed in the interface.
Note: This a web-only setting.
Time Format Specifies how the time is displayed in the interface.
Auto Adjust for Daylight Saving Time Specifies the daylight saving time setting. When you
enable this setting, the system clock automatically
changes for daylight saving time.
Note: This a web-only setting.
Time Zone Specifies the time difference between GMT (Greenwich
Mean Time) and your location.
Time Server Specifies whether the connection to a time server is
automatic or manual for system time settings. You can
also select Off to enter the date and time yourself.
Primary Time Server Address Specifies the address of the primary time server to use
when Time Server is set to Manual.
Secondary Time Server Address Specifies the address of the time server to use when
the Primary Time Server Address does not respond.
This is an elective field.
Configuring General System Settings
Polycom, Inc. 31
To Next Page
Loading...
Need help?
General
