EasyManuals Logo

Polycom RealPresence Group 310 Administrator's Guide

Polycom RealPresence Group 310
369 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
Procedure
1. In the system web interface, go to Admin Settings > General Settings > Pairing >
RealPresence Touch Home Screen Configuration.
2. Configure the settings on the Home Screen Settings screen that are described in the following
topics.
Choose the Home Screen Icons
You can choose home screen icons for your RealPresence Group Series system local interface. By
default, two icon buttons appear in the lower center of the RealPresence Touch Home screen; users see
only the Place a Call and Show Content icons. However, you can customize the number of screens and
Home screen icons in a preferred order. Once you customize the Home screen configuration, users can
scroll through one to three Home Screens, with up to three icons on each screen.
Procedure
1. In the web user interface, go to Admin Settings > General Settings > Pairing > RealPresence
Touch Home Screen Configuration.
2. Under Configure Home Screen, click Configure Home Screen Options.
3. At Home screen 1 > Button 1, select one to three icon buttons to appear per screen in your
preferred order.
You can select from the following icon buttons:
None (no icon)
Place a Call
Show Content
Keypad
Contacts
Speed Dial
Recent
System Information
User Settings
Administration
4. If you want to include more than one Home screen, continue selecting icon buttons for Home
Screen 2 and Home Screen 3 until all screens are configured.
For example, Home Screen 1 > Button 1 > Recent Call Button 2 > Place a Call > Button 3 >
Contacts.
5. To save your selections, click Save.
Your new selections should display on the Home screens of the RealPresence Touch device.
Choose the Place a Call Screen Icons
You can customize the Place a Call screen to display certain icon buttons for your RealPresence Group
Series system. Since there are four ways to place a call by default, after you tap the Place a Call button,
all the selections display on the screen. You can customize one of the icon buttons to be the default. All of
the other Place a Call icon buttons continue to display at the top of the screen.
Setting Up a Polycom RealPresence Touch Device
Polycom, Inc. 225

Table of Contents

Other manuals for Polycom RealPresence Group 310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom RealPresence Group 310 and is the answer not in the manual?

Polycom RealPresence Group 310 Specifications

General IconGeneral
Network ProtocolsH.323, SIP
Network Interfaces1 x 10/100/1000 Ethernet
Video Resolution1080p, 720p
Audio StandardsG.711, G.722, G.722.1, G.728, G.729A
Video StandardsH.263, H.263+, H.264, H.264 High Profile
Network10/100/1000 Ethernet
Video Input1 x HDMI
Video OutputHDMI
Audio Input1 x 3.5mm stereo line-in
Audio Output1 x 3.5mm stereo line-out
Other Interfaces2 x USB 2.0
People Video Resolution1080p
Content SharingPeople+Content IP
SecurityAES
CameraPolycom EagleEye Acoustic or EagleEye IV

Related product manuals