EasyManuals Logo

Polycom realpresence group series Administrator's Manual

Polycom realpresence group series
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
Manage the System Remotely
Polycom, Inc. 162
To configure the LDAP directory server:
1 In the web interface, go to Admin Settings > Servers > Directory Servers and select the LDAP
Server Type.
2 Configure these settings on the Directory Servers page.
To configure the Skype for Business Server 2015 or Microsoft Lync Server 2013 directory
settings:
1 In the web interface, go to Admin Settings > Network > IP Network > SIP.
2 Configure the SIP settings as described in Configure SIP Settings for Integration with Microsoft
Servers.
3 In the web interface, go to Admin Settings > Servers > Directory Servers and select the
Microsoft Service Type.
4 Configure these settings on the Directory Servers page.
Setting Description
Server Address Specifies the IP address or DNS address of the Global Directory Server. You can enter up to
five addresses.
Password Lets you enter the global directory password, if one exists.
LDAP Setting Description
Server Address Specifies the address of the LDAP directory server. With Automatic Provisioning, this setting
is configured by the server and appears as read only.
Server Port Specifies the port used to connect to the LDAP server. With Automatic Provisioning, this
setting is configured by the server and appears as read only.
Base DN
(Distinguished
Name)
Specifies the top level of the LDAP directory where searches will begin. With Automatic
Provisioning, this setting is configured by the server and appears as read only.
Multitiered
Directory
Default Group
DN
Specifies the top level group of the LDAP directory required to access the hierarchical
structure. With Automatic Provisioning, this setting is configured by the server and appears as
read only.
Authentication
Type
Specifies the protocol used for authentication with the LDAP server: NTLM, BASIC, or
Anonymous.
Use SSL
(Secure Socket
Layer)
Enables SSL for securing data flow to and from the LDAP server.
Domain Name Specifies the domain name for authentication with the LDAP server.
User Name Specifies the user name for authentication with LDAP server.
Password Specifies the password for authentication with the LDAP server.

Table of Contents

Other manuals for Polycom realpresence group series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom realpresence group series and is the answer not in the manual?

Polycom realpresence group series Specifications

General IconGeneral
Video StandardsH.264, H.263, H.264 High Profile
Audio StandardsG.711, G.728
Content SharingPeople+Content
NetworkH.323, SIP
SecurityAES encryption
Video InputHDMI
Video OutputHDMI
Audio InputHDMI
Audio OutputHDMI
Audio FeaturesNoise Reduction, Automatic Gain Control
ConnectivityEthernet
PortsEthernet, HDMI
CompatibilityMicrosoft Lync / Skype for Business, BlueJeans, Zoom

Related product manuals