Polyend Play - Page 118

118
Polyend Play Manual Rev 1
NOTES
Sequencing Patterns
6
The basic process for creating beat ll or melody ll templates is a strict
process and steps must be adhered to in the correct order.
3
2
1
4
5
Build Patterns
Build the patterns precisely as per the dened structure with loaded samples.
Beat Fills
Beat Fills
Melody Fills
Melody Fills
Load First: Kick Load Second: HiHat Load Last: Snare
Load First: Synth Load Second: Bass
Track 1
Track 1
Kicks
Synth
Track 2
Track 2
Snares
Synth
Track 3
Track 3
Track 4
Track 5
Maximum 16 Steps
Maximum 64 Steps
Hats
Synth
Synth
Bass
Load Sample Folders.
Samples can be created ofine from Play i.e. on a PC or Mac. These can be
assembled into the instrument folders on the SD Card and named as such.
These folders must be loaded to the sample pool in a specic order.
Create a New Project
Create a new blank project. This is used to create the
pattern template based on set criteria.
Save Project
Save the project using ‘Save’ or ‘Save As’
in the le menu.
Relocate the Templates
Move and name the created patterns to the
‘BeatFill’ folder or to the ‘MelodyFill’ folder.
This should be done ofine using a Mac or
PC with the SD Card.
New Project
Open Project
Save Project
Save Project As
Export
File
Back Play Perform
Projects
BeatFills
MelodyFills
MyProj
Patterns
1.Pattern
2.Pattern